The starlink consumes a significant amount of AC power, which is wasteful when powering it through a large inverter. Moreover, most vehicles and remote locations lack access to conventional 110V AC power outlets. The XTAR-Link EL6 DC power supply design seamlessly converts the Standard V4 (Gen 3) dish to work efficiently on DC power.
The new Starlink V5 uses the same cable and PoE power architecture as the Standard V4. Starlink hasn't published the V5 power brick's electrical specs yet; based on the official install documentation, the V5 is expected to accept the same 56V PoE input the EL6 delivers. We're verifying this on a production V5 unit and will post bench results here. For the full picture of what the V5 changes for off-grid power, see our Starlink V5 vs Mini breakdown.
Get rid of the bulky starlink router and reduce power consumption Now! Simply connect the power cable to a 12V or 24V power source, connect to your preferred router, and you’ re online! 【 30 Days Return & 12 Months Warranty 】
Convenient & Cost-effective
The XTAR-Link EL6 Conversion unit combines a 12/24V-56V converter, PoE injector, and 12V voltage regulator into one compact device, providing a professional and reliable power solution for the Standard V4 (Gen 3) dish. This design reduces the complexity of DIY setups, minimizes the risks of operational failure, and saves on the cost of additional DIY components.
No Wire cutting, no modification of the dish or cable, and no voiding of your sta**ink warranty!
Dual Efficiency in Power Saving
It not only saves up to 30% of the power required to run starlink products but also reduces the energy consumption of the router. By using a built-in 12V regulator to directly connect to a 3rd-party router, it significantly reduces power loss from DC-AC-DC conversion.
Multiple Power Connection
√ With the provided power cable (O-ring to Anderson), you can connect the starlink Dish directly to many 12/24V battery systems, such as those set in RVs, boats, and off-grid solar setups.
√ You can also connect the starlink Dish to the 12V/24V electrical system on any vehicle or portable power station. The XTAR EL6 allows you to take your starlink wherever your journey leads.
Full protection
Protected by a waterproof, shockproof, and corrosion-resistant metal casing, it also features a power switch, built-in reliable fuses, and a power indicator light to ensure a safe and stable connection to the starlink network in various environments.
IMPORTANT NOTES
1) Using the snow melt function requires an additional 120W and cannot be used via a cigarette lighter plug, as most vehicles and power stations have a 10A limit.
2) For starlink to work properly under each mode, we advise powering the XTAR-Link DC conversion EL3 or EL6 with a minimum of a 12V 15A electrical system, or better yet, a 24V 10A system (which should provide sufficient amperage output) through a Ring terminal or hardwire connection.
3) Does the EL6 work with the new Starlink V5?
It's expected to. The V5 continues the V4's cabling and PoE power architecture, and the EL6 outputs the 56V PoE this dish family uses. Starlink hasn't published the V5 brick's official electrical specs yet, so we're confirming on a production V5 unit. This answer will be updated with bench results.
If you need Standard Actuated (Gen 2) DC converter, please click here
Works as advertised no surprise
Works as advertised no surprises. Been using g for a few weeks powered by 1500 wh battery via 12 volt cigarette socket. Starlink averages about 20 volts. On off switch is great. I leave it plugged in all the time which saves trouble and wear.
We were RV'ing in Montana when we damaged our Starlink cable. I looked on eBay and found XTAR who would FedEx it out to us in a remote location. It arrived quickly and saved the trip. Great service and the cable is a good quality.
I installed and used for 5 months straight without any issues on my sailboat while cruising the Bahamas. Was able to save on power consumption with this set up. Unit would be warm to touch but not hot. WiFi provided with the kit provided good coverage from any where on the boat (48 footer).
Great products and fast delivery
Fast delivery. Great products, thank you
Simple as to setup, the 12VDC supply is invaluable when setup for off-grid application
Works well , great coverage
Mounted on port forward rail. Has been perfect since fitted.
Movement on rail has been nil even in 55 knot winds
Wonderful
Is really good product, Working as expected
Is really good product, Working as expected
Is really good product, Working as expected
I picked up the foldable tripod after leaving my stock metal one on a picnic table at the last campground. I love that it's light-weight, and folds up. So, much easier to store. The Gen 2 Starlink fits into the tripod and clamps firmly. I've had it set up in fairly windy conditions, and never found it tipped over. I did use the provided stakes once in a very windy location. Worked like a champ.
Easy purchase and when it arrived, easy install.
This works awesome. I would rank it right up-there with getting Starlink for my RV. Family members have ordered one after seeing mine.
