Living off-grid, or in a motorhome, power consumption can be critical. The starlink uses a lot of AC power. Having to convert our battery DC power into AC through an inverter, then back to DC through a power supply is not the most efficient way to power any device. It can be converted to dc power for a significant savings in draw as well as savings from not having the dc to ac conversion.
【Why choose XTAR-LINK EL3】
Convenient & Cost-effective
XTAR-Link EL3 Conversion combines a 10/30 volts to 48 volts booster, PoE injector, and 12V voltage regulator into one unit, providing a professional and reliable power solution for Gen 2 dish. This reducing the complexity of DIY , risks of operational failure, and also save cost of additional DIY components.
No Wire cutting, no modifying the dish or cable, and no voiding your warranty!
Dual Efficiency in Power Saving
It not only saves up to 30% of the power that run starlink products, but also reduces the energy consumption of routers. It includes a built-in 12V regulator directly connect to 3rd party router. It significantly reduces the power loss of router from DC-AC-DC conversion.
*Need more energy saving? You can choose a suitable and shorter cable here.
Versatile Power Compatibility
With provided power cable (o-ring to Anderson), you can connect Dish directly to many 12/24V battery systems, such as those in RVs, boats and off-grid solar setups.
You can also connect Dish to the 12/24V electrical system on any vehicle or Portable Power Stations. XTAR EL3 lets you takes your starlink wherever your journey takes you.
Full protection
Protected by waterproof, shockproof, and corrosion-resistant metal casing, it also features a power switch, built-in reliable fuses, and a power indicator light to ensure a safe and stable connection to the network in various environments.
Independent Power Indicator and On/Off Switch
【 XTAR-Link EL3 & EL3 V2】 Specification
Power Input: 12V-30V/Anderson
Output: 1x PoE Port, 1x WAN Port, 1x 12V DC Port (DC5521)
Dimension: 20*21.5*5mm
Housing Material: EL3 with Metal Housing; EL3 V2 with Plastic Housing
【 30-Day Return & 12-Month Warranty 】
【 KIT 】Include: Choose KIT if you will use own prefer 3rd party router
1x XTAR-Link EL3 V2
1x Power Cable of EL3 V2: O-ring to Andersion
1x RJ45 Adapter for Gen2 Dish (Aquated Standard)
1x RJ45 cable for Dishy adpater
1x Power cable for 3rd Router(DC5521 Male to DC5521 Male)
1x Power cable for 3rd Router(DC5521 Male to DC5521 Male)
1x Additonal AC power adapter for 3rd Router
IMPORTANT NOTES 1) Using the snow melt function draws an additional 120W and cannot be used via cigarette lighter plug as most vehicles and power station have a 10A limit.
2) For starlink work properly under each mode, We advise power XTAR-Link DC conversion EL3 or EL6 by minimum 12V 15A electrical system or better 24V 10A (should comes enough amperage output) through Ring terminal or hardwire connection.
Simple to use, easy to install and saves a ton in off grid power usage.
S
Steve Brakrbill (United States)
I need to get a router to make it work.
Let customers speak for us
from 274 reviews
Works great.
Works as advertised no surprise
Works as advertised no surprises. Been using g for a few weeks powered by 1500 wh battery via 12 volt cigarette socket. Starlink averages about 20 volts. On off switch is great. I leave it plugged in all the time which saves trouble and wear.
We were RV'ing in Montana when we damaged our Starlink cable
We were RV'ing in Montana when we damaged our Starlink cable. I looked on eBay and found XTAR who would FedEx it out to us in a remote location. It arrived quickly and saved the trip. Great service and the cable is a good quality.
I installed and used for 5 months straight without any issues on my sailboat while cruising the Bahamas. Was able to save on power consumption with this set up. Unit would be warm to touch but not hot. WiFi provided with the kit provided good coverage from any where on the boat (48 footer).
I picked up the foldable tripod after leaving my stock metal one on a picnic table at the last campground. I love that it's light-weight, and folds up. So, much easier to store. The Gen 2 Starlink fits into the tripod and clamps firmly. I've had it set up in fairly windy conditions, and never found it tipped over. I did use the provided stakes once in a very windy location. Worked like a champ.
Xtar-Link works right out of the box ! I like it !
Xtar-Link
I purchased the X6 full power kit
which had everything I needed to
Charge batteries. Included 6 - 18650 battery adapters which I have plenty 18650’s from old laptops battery compartments. The battery pack is well made of hard plastic and fits perfectly in my Starlink mini version 1. The battery compartment holds 6 batteries at 4900mAh which gave me about 3.5 hours of runtime. I like the convenience of replacing batteries to continue my runtime. The Xtar-Link
makes my mini truly portable. While hiking, I take it out of my backpack, turn it on by pressing the power button on the Xtar-Link, put it on the ground and run Starlink alignment and begin using mini for WiFi-calling if no cell service and/or connect to my clients remotely. I don’t have run Starlink power cable which is great for quick access. It is a complete power solution. I would have ordered more 4900 mAh batteries if they would had an option when I purchased, but I see they have added that option since then. The Xtar-Link is well made and just works right out the box…..I like it !
The quality is typical “Made in China” or brought from Temu. What they advertise and what you get don’t exactly align. The 3 stars are because they actually delivered something. I ended up buying again direct from Starlink and the quality is totally different. I should have known better and won’t make tge mistake twice.
Starlink Mini Battery Adapter for Milwaukee Battery
Jessie Gibbons
I love this very easy to set up.
I love this very comparable
XTAR-Link MP158 Power Bank for Starlink Mini
Morgan G Cook
Great product
Great product. It saves me the stress of not having to worry if thieves would steal my Starlink if I left it outside. I can put it in my truck on the dashboard and it catches the signal through the windshield. I definitely recommend this product!
XTAR-LINK
K R
Works great.
Works as advertised no surprise
Works as advertised no surprises. Been using g for a few weeks powered by 1500 wh battery via 12 volt cigarette socket. Starlink averages about 20 volts. On off switch is great. I leave it plugged in all the time which saves trouble and wear.
Starlink Mini Cigarette Lighter Plug DC Step Up Converter (EL13-C)
Don
Perfect RV upgrade for the Starlink Gen 2.
I picked up the foldable tripod after leaving my stock metal one on a picnic table at the last campground. I love that it's light-weight, and folds up. So, much easier to store. The Gen 2 Starlink fits into the tripod and clamps firmly. I've had it set up in fairly windy conditions, and never found it tipped over. I did use the provided stakes once in a very windy location. Worked like a champ.
