The starlink consumes a significant amount of AC power, which is wasteful when powering it through a large inverter. Moreover, most vehicles and remote locations lack access to conventional 110V AC power outlets. The XTAR-Link EL6 DC power supply design seamlessly converts the Gen3 dish to work efficiently on DC power.
【Compatible with Starlink V5】
The EL6 V3 also powers the new Starlink V5 from a 12V or 24V battery system, replacing the stock AC power brick.
Note: the EL6 V3 setup requires a third-party router for V5. The V5's stock Router Mini is powered over PoE from the dish's own power supply, so it isn't used in this configuration. Choose the KIT if you already own a router, or the SET if you'd like one included.
Get rid of the bulky starlink router and reduce power consumption Now! Simply connect the power cable to a 12V or 24V power source, connect to your preferred router, and you’ re online!
【Why choose XTAR-LINK EL6 V3】
Convenient & Cost-effective
The XTAR-Link EL6 V3 Conversion combines 12/24V-56V Converter, PoE injector, and 12V voltage regulator into one compact device, providing a professional and reliable power solution for the starlink Gen 3 (Standard 4/4x) dish. This design reduces the complexity of DIY setups, minimizes the risks of operational failure, and also saves on the cost of additional DIY components.
No Wire cutting, no modification of the dish or cable, and no voiding your starlink warranty!
Dual Efficiency in Power Saving
It not only saves up to 30% of the power required to run Starlink products, but also reduces the energy consumption of the router. By using a built-in 12V regulator to directly connect to 3rd-party router, it significantly reduces the power loss from DC-AC-DC conversion.
Multiple Power Connection
√ With the provided power cable (o-ring to Anderson), you can connect starlink Dish directly to many 12/24V battery systems, such as those set in RVs, boats and off-grid solar setups.
√ You can also connect starlink Dish to the 12V/24V electical system on any vehicle or Portable Power Station. The XTAR EL6 allows you takes your starlink wherever your journey leads.
Full protection
Protected by a waterproof, shockproof, and corrosion-resistant metal casing, it also features a power switch, built-in reliable fuses, and a power indicator light to ensure a safe and stable connection to the starlink network in various environments.
【 XTAR-Link EL6 V3】 Specification
Power Input: 12V-30V/Anderson
Compatible with : Starlink Standard (Gen3 / V4/ 4X), Starlink V5
Output: 1x PoE Port 56V, 1x WAN Port, 1x 12V DC Port (DC5521)
Dimension: 20*21.5*5mm
Housing Material: Plastic
【 30-Day Return & 12-Month Warranty 】
【 KIT 】Include: Choose KIT if you plan to use own preferred 3rd party router
1x XTAR-Link EL6
1x Power cables O-ring to Anderson
1x Power cable for your 3rd Router (DC5521 Male to DC5521 Male)
【 SET 】Include:
1x XTAR-Link EL6
1x Power Cable A for EL6: O-ring to Andersion
1x Power cable for 3rd Router(DC5521 Male to DC5521 Male)
1x RJ45 to RJ45 cable for connect 3rd Party router
1x 3rd Party Upgraded RouterWiFi 6 (Up to 3000 Mbpsof 2.4 GHz & 5 GHz total)
IMPORTANT NOTES 1) Using the snow melt function requires an additional 120W and cannot be used via cigarette lighter plug as most vehicles and power station have a 10A limit.
2) For starlink to work properly under each mode, We advise powering the XTAR-Link DC conversion EL3 or EL6 with a minimum a 12V 15A electrical system, or better yet, a 24V 10A system (which should provide sufficient amperage output) through a Ring terminal or hardwire connection.
If you need Gen 2/Standard Actuated DC conversion, pleaseclick here
I never leave product reviews but this time I'm making an exception. I honestly couldn't be happier with my xtar link power supply. I had a problem in the beginning and they fixed it right away. I'm really happy with the support and the product.
M
Michael (United States)
Works as advertized
Easy to get up and get working. Excellent connection and speed. A smaller router would have been nice to save on space. Pleased overall with the kit.
K
Kevin (Canada)
This unit was easy to hook up to my 12 volt fuse panel and mount on the wall of my closet
This unit was easy to hook up to my 12 volt fuse panel and mount on the wall of my closet. Worked well powering both my Dish/Starlink router and a new Netgear 3rd party one I'm also trying out for power consumption.
S
Stony Hartman (Spain)
Perfect and very easy to connect Starlink Gen3 to 12v
With this kit you connect Starlink Gen3 very easy to 12v. Ideal for your boat.
J
Jon
Perfect for our motohome.
Delivery time was good to Australia.
Easy to install and setup.
Quality components.
Very happy with it as I no longer require to run an inverter saving considerable battery power.
Works as advertised no surprise
Works as advertised no surprises. Been using g for a few weeks powered by 1500 wh battery via 12 volt cigarette socket. Starlink averages about 20 volts. On off switch is great. I leave it plugged in all the time which saves trouble and wear.
We were RV'ing in Montana when we damaged our Starlink cable
We were RV'ing in Montana when we damaged our Starlink cable. I looked on eBay and found XTAR who would FedEx it out to us in a remote location. It arrived quickly and saved the trip. Great service and the cable is a good quality.
I installed and used for 5 months straight without any issues on my sailboat while cruising the Bahamas. Was able to save on power consumption with this set up. Unit would be warm to touch but not hot. WiFi provided with the kit provided good coverage from any where on the boat (48 footer).
I picked up the foldable tripod after leaving my stock metal one on a picnic table at the last campground. I love that it's light-weight, and folds up. So, much easier to store. The Gen 2 Starlink fits into the tripod and clamps firmly. I've had it set up in fairly windy conditions, and never found it tipped over. I did use the provided stakes once in a very windy location. Worked like a champ.
Xtar-Link works right out of the box ! I like it !
Xtar-Link
I purchased the X6 full power kit
which had everything I needed to
Charge batteries. Included 6 - 18650 battery adapters which I have plenty 18650’s from old laptops battery compartments. The battery pack is well made of hard plastic and fits perfectly in my Starlink mini version 1. The battery compartment holds 6 batteries at 4900mAh which gave me about 3.5 hours of runtime. I like the convenience of replacing batteries to continue my runtime. The Xtar-Link
makes my mini truly portable. While hiking, I take it out of my backpack, turn it on by pressing the power button on the Xtar-Link, put it on the ground and run Starlink alignment and begin using mini for WiFi-calling if no cell service and/or connect to my clients remotely. I don’t have run Starlink power cable which is great for quick access. It is a complete power solution. I would have ordered more 4900 mAh batteries if they would had an option when I purchased, but I see they have added that option since then. The Xtar-Link is well made and just works right out the box…..I like it !
The quality is typical “Made in China” or brought from Temu. What they advertise and what you get don’t exactly align. The 3 stars are because they actually delivered something. I ended up buying again direct from Starlink and the quality is totally different. I should have known better and won’t make tge mistake twice.
Starlink Mini Battery Adapter for Milwaukee Battery
Jessie Gibbons
I love this very easy to set up.
I love this very comparable
XTAR-Link MP158 Power Bank for Starlink Mini
Morgan G Cook
Great product
Great product. It saves me the stress of not having to worry if thieves would steal my Starlink if I left it outside. I can put it in my truck on the dashboard and it catches the signal through the windshield. I definitely recommend this product!
XTAR-LINK
K R
Works great.
Works as advertised no surprise
Works as advertised no surprises. Been using g for a few weeks powered by 1500 wh battery via 12 volt cigarette socket. Starlink averages about 20 volts. On off switch is great. I leave it plugged in all the time which saves trouble and wear.
Starlink Mini Cigarette Lighter Plug DC Step Up Converter (EL13-C)
Don
Perfect RV upgrade for the Starlink Gen 2.
I picked up the foldable tripod after leaving my stock metal one on a picnic table at the last campground. I love that it's light-weight, and folds up. So, much easier to store. The Gen 2 Starlink fits into the tripod and clamps firmly. I've had it set up in fairly windy conditions, and never found it tipped over. I did use the provided stakes once in a very windy location. Worked like a champ.
