The starlink consumes a significant amount of AC power, which is wasteful when powering it through a large inverter. Moreover, most vehicles and remote locations lack access to conventional 110V AC power outlets. The XTAR-Link EL6 DC power supply design seamlessly converts the Gen3 dish to work efficiently on DC power.
Get rid of the bulky starlink router and reduce power consumption Now! Simply connect the power cable to a 12V or 24V power source, connect to your preferred router, and you’ re online!
Convenient & Cost-effective
The XTAR-Link EL6 V3 Conversion combines 12/24V-56V Converter, PoE injector, and 12V voltage regulator into one compact device, providing a professional and reliable power solution for the starlink Gen 3 dish. This design reduces the complexity of DIY setups, minimizes the risks of operational failure, and also saves on the cost of additional DIY components.
No Wire cutting, no modification of the dish or cable, and no voiding your starlink warranty!
Dual Efficiency in Power Saving
It not only saves up to 30% of the power required to run Starlink products, but also reduces the energy consumption of the router. By using a built-in 12V regulator to directly connect to 3rd-party router, it significantly reduces the power loss from DC-AC-DC conversion.
Multiple Power Connection
√ With the provided power cable (o-ring to Anderson), you can connect starlink Dish directly to many 12/24V battery systems, such as those set in RVs, boats and off-grid solar setups.
√ You can also connect starlink Dish to the 12V/24V electical system on any vehicle or Portable Power Station. The XTAR EL6 allows you takes your starlink wherever your journey leads.
Full protection
Protected by a waterproof, shockproof, and corrosion-resistant metal casing, it also features a power switch, built-in reliable fuses, and a power indicator light to ensure a safe and stable connection to the starlink network in various environments.
IMPORTANT NOTES
1) Using the snow melt function requires an additional 120W and cannot be used via cigarette lighter plug as most vehicles and power station have a 10A limit.
2) For starlink to work properly under each mode, We advise powering the XTAR-Link DC conversion EL3 or EL6 with a minimum a 12V 15A electrical system, or better yet, a 24V 10A system (which should provide sufficient amperage output) through a Ring terminal or hardwire connection.
If you need Gen 2/Standard Actuated DC conversion, please click here
We were RV'ing in Montana when we damaged our Starlink cable. I looked on eBay and found XTAR who would FedEx it out to us in a remote location. It arrived quickly and saved the trip. Great service and the cable is a good quality.
I installed and used for 5 months straight without any issues on my sailboat while cruising the Bahamas. Was able to save on power consumption with this set up. Unit would be warm to touch but not hot. WiFi provided with the kit provided good coverage from any where on the boat (48 footer).
Great products and fast delivery
Fast delivery. Great products, thank you
Simple as to setup, the 12VDC supply is invaluable when setup for off-grid application
Works well , great coverage
Mounted on port forward rail. Has been perfect since fitted.
Movement on rail has been nil even in 55 knot winds
Wonderful
Is really good product, Working as expected
Is really good product, Working as expected
Is really good product, Working as expected
I picked up the foldable tripod after leaving my stock metal one on a picnic table at the last campground. I love that it's light-weight, and folds up. So, much easier to store. The Gen 2 Starlink fits into the tripod and clamps firmly. I've had it set up in fairly windy conditions, and never found it tipped over. I did use the provided stakes once in a very windy location. Worked like a champ.
Easy purchase and when it arrived, easy install.
This works awesome. I would rank it right up-there with getting Starlink for my RV. Family members have ordered one after seeing mine.
Great case for our StarLink setup…
