【Why DC powered】
Living off-grid, or in a motorhome, power consumption can be critical. The Starlink uses a lot of AC power. Having to convert our battery DC power into AC through an inverter, then back to DC through a power supply is not the most efficient way to power any device. It can be converted to dc power for a significant savings in draw as well as savings from not having the dc to ac conversion.
【Why choose XTAR-LINK EL3】
Convenient & Cost-effective
XTAR-Link EL3 Conversion combines a 10/30 volts to 48 volts booster, PoE injector, and 12V voltage regulator into one unit, providing a professional and reliable power solution for Starlink Gen 2 dish. This reducing the complexity of DIY , risks of operational failure, and also save cost of additional DIY components.
No Wire cutting, no modifying the dish or cable, and no voiding your Starlink warranty!
Dual Efficiency in Power Saving
It not only saves up to 30% of the power that run Starlink products, but also reduces the energy consumption of routers. It includes a built-in 12V regulator directly connect to 3rd party router. It significantly reduces the power loss of router from DC-AC-DC conversion.
*Need more energy saving? You can choose a suitable and shorter cable here.
Versatile Power Compatibility
- With provided power cable (o-ring to Anderson), you can connect Starlink Dish directly to many 12/24V battery systems, such as those in RVs, boats and off-grid solar setups.
- You can also connect Starlink Dish to the 12/24V electrical system on any vehicle or Portable Power Stations. XTAR EL3 lets you takes your Starlink wherever your journey takes you.
Full protection
Protected by waterproof, shockproof, and corrosion-resistant metal casing, it also features a power switch, built-in reliable fuses, and a power indicator light to ensure a safe and stable connection to the Starlink network in various environments.
【 XTAR-Link EL3 Specification 】
- Power Input: 12V-30V/Anderson
- Output: 1x PoE Port, 1x WAN Port, 1x 12V DC Port (DC5521)
- Dimension: 20*21.5*5mm
- Housing Material: EL3 with Metal Housing
【 30-Day Return & 12-Month Warranty 】
【 KIT 】Include: Choose KIT if you will use own prefer 3rd party router
- 1x XTAR-Link EL3
- 1x Power Cable of EL3: O-ring to Andersion
- 1x RJ45 Adapter for Gen2 Dish (Aquated Standard)
- 1x RJ45 cable for Dishy adpater
- 1x Power cable for 3rd Router(DC5521 Male to DC5521 Male)
【 SET 】Include:
- 1x XTAR-Link EL3
- 1x Power Cable of EL3: O-ring to Anderson
- 1x RJ45 Adapter for Gen2 Dish (Aquated Standard)
- 1x RJ45 Cable A for Dishy Adapter
- 1x 3rd Router: Upgraded Router WiFi 6 (Up to 3000 Mbps of 2.4 GHz & 5 GHz total)
- 1x RJ45 Cable for Router
- 1x Power cable for 3rd Router(DC5521 Male to DC5521 Male)
- 1x Additional AC power adapter for 3rd Router
IMPORTANT NOTES
1) Using the snow melt function draws an additional 120W and cannot be used via cigarette lighter plug as most vehicles and power station have a 10A limit.
2) For Starlink work properly under each mode, We advise power XTAR-Link DC conversion EL3 or EL6 by minimum 12V 15A electrical system or better 24V 10A (should comes enough amperage output) through Ring terminal or hardwire connection.
*********************************************************************************************
The Real Test reviews below:
"Save Up to 43% Power !! "
Save 210Wh per day ≈7 hours run-time of Starlink Gen2
Earn $50 Coupon by Sharing Your Experience using XTAR-Link EL3/EL6
- Send us the screenshoot of your posts on Facebook/instagram/Reddit/Related Forums etc. Email: service@xtar-link.com
- Only 50 pcs limited, each Coupon is for One Time use for order paid over $51(exclude freight).